THERMAL SHOCK
CHAMBERS

If your products need to survive rapid or extreme temperature changes, Nexia Scientific Ltd can supply test chambers. We serve the UK and Ireland.

Get in touch

Serie TSS

The CTS temperature shock test cabinets allow temperature change rates of up to 100 Kelvin in one minute. The most common national and international standards are fulfilled (DIN, IEC, MIL). The compressed air drying system allows up to 3000 test cycles at minimum power consumption without defrosting.

Minimum external measurements due to compact method of construction
Optimised parameters for highest testing precision
Minimum noise level

Test chambers

Standard version of the TSS line:

Multicolour touch panel / 32 bit controller
Single-hand operated door handle, lockable
Entry port ø 50 mm
Observation window
Air dryer system to avoid freezing in long time testing
Shelf, stainless steel
Error display in plain text
Potential free contact for malfunction signal
Ethernet interface

CTS user benefits:

Extremely high temperature change rates
Up to 3000 cycles without defrosting or test program interruption
Minimum external measurements due to compact method of construction
Service-friendly construction
Minimum noise level
Simple user-friendly operation and programming
Low power-consumption
Optimised parameters for highest testing precision
Complies with current CE and EMC regulation

Cycle operation in the cold chamber (heating and cooling in the cold chamber)
Increased entry ports ø 125 mm (for 130 + 350 ltr.)
Additional baskets in different design
Increased temperature range hot chamber to + 250° C (for 130 litre.)
Temperature protection for test specimen
Additional Pt 100 for test specimen measuring
CID software for programming and documentation
Water cooled condenser for TSS -70/32 (removes heat from test area)
Air cooled condenser for TSS -70/130 and TSS -70/350 (for sites with no water cooling resource)
RS 232 interface
USB Port
Higher test load
Other chamber sizes and options on request.

Type	Measure	Unit	TSS -70/32	TSS -70/130	TSS -70/350
Test Space		liters	32	130	350
Test Space Dimensions	height	mm, appr.	300	410	610
Test Space Dimensions	width	mm, appr.	360	480	850
Test Space Dimensions	depth	mm, appr.	300	660	680
Overall Dimensions	height	mm, appr.	1820 (2415*)	1820 (2525*)	2450 (3200*)
Overall Dimensions	width	mm, appr.	820	940	1400 (1550**)
Overall Dimensions	depth	mm, appr.	1375	2335	2200
Machine Unit incl. Switchboard Cabinet	height	mm, appr.	—-	—-	2100
Machine Unit incl. Switchboard Cabinet	width	mm, appr.	—-	—-	2300
Machine Unit incl. Switchboard Cabinet	depth	mm, appr.	—-	—-	950
Temperature Tests
Temperature Range	Hot Chamber	°C	+50/+200	+50/+200	+50/+200
	Cold Chamber	°C	-80/+100	-80/+100	-80/+100
Adaption Time with 2,5 kg IC�s	TSS -70/32	min	< 15	—-	—-
Adaption Time with 10 kg IC�s	TSS -70/130	min	—-	< 15	—-
Adaption Time with 15 kg IC�s	TSS -70/350	min	—-	—-	< 15
Changing Time	sec.	sec.	< 10	< 10	< 20
Test Load, max.	TSS -70/32	kg	10	—-	—-
	TSS -70/130	kg	—-	20	—-
	TSS -70/350	kg	—-	—-	50
Temperature Fluctuation		K	± 1 temporally	± 1 temporally	± 1 temporally
Nominal Voltage			400 V +6% -10%, 3/N, 50 Hz	400 V +6% -10%, 3/N, 50 Hz	400 V +6% -10%, 3/N, 50 Hz
Nominal Power		kW, appr.	9,7	16,7	32,2
Condenser			air-cooled	water-cooled	water-cooled
Weight	Cabinet	kg, appr.	650	950	1500
	Machine Unit	kg, appr.	—-	—-	1000
Noise level	dB(A)	dB(A)	58	< 60	< 65

All figures are average values which have been obtained at a temperature of +25° C, without test specimens, without thermal load and without options.
We reserve the right to make alterations due to technical development.

GET IN TOUCH TODAY

Tel: 0044 1664 370465

Email: service@nexiascientific.co.uk

THERMAL SHOCK CHAMBERS

GET IN TOUCH TODAY

THERMAL SHOCK
CHAMBERS